Transmitter for LED sensor Wirly switch/dimmer (switch) 12V DC / 24V DC
4,000.00 L
Përshkrim
This wireless switch for the Wirly system turns the luminaire on or off with a short press, and increases or decreases the luminous flux with a long press.
The transmitter can be linked with up to 8 receivers and a receiver can be linked with up to 10 different transmitters. For this reason they are sold separately, to make desired configurations according to the needs of the installation.
Veçoritë e produktit
- Çmimi për një copë
- Paketimi: 10 copë/kuti
- Wireless switch for Wirly sensor, which turns the luminaire on or off with a short press, and increases or decreases the luminous flux with a long press.
- This transmitter is responsible for sending the radio frequency signal to the receiver (sold separately) which must be hidden within a range of approximately 10 m (1 transmitter can be linked with up to 8 receivers and 1 receiver can be linked with up to 10 different emitters).
- It is valid for 12 DC or 24V DC LED luminaires.
- The transmitter works with a CR2032 battery included, a neodymium magnet with double-sided tape to fix it to the installation surface and a screw in case you prefer to fix the magnet directly by screwing.
- Made of black plastic.
Share This Items :
Përshkrim
This wireless switch for the Wirly system turns the luminaire on or off with a short press, and increases or decreases the luminous flux with a long press.
The transmitter can be linked with up to 8 receivers and a receiver can be linked with up to 10 different transmitters. For this reason they are sold separately, to make desired configurations according to the needs of the installation.
Shqyrtime
Ende pa shqyrtime.
Shqyrtime
Ende pa shqyrtime.